353mm 235V Sk15 Gold Plated Reflector Infrared Tubular Bulb Quartz Infrared Heater Halogen Lamp

353mm 235v SK15 Gold coated reflector ir tubular bulb quartz infrared heaters halogen lamps quartzinfraredheater.en.made-in-china.comRisen lighting manufactures more than 1,000 quartz replacement infrared lamps for commercial or industrial use. Risenhas been producing quartz infrared lamps since 2009. The lamp can be made o

Featured Products

353mm 235v SK15 Gold coated reflector ir tubular bulb quartz infrared heaters halogen lamps 



quartzinfraredheater.en.made-in-china.com

Risen lighting manufactures more than 1,000 quartz replacement infrared lamps for commercial or industrial use. Risen
has been producing quartz infrared lamps since 2009. The lamp can be made of almost any length, wattage, voltage and
various terminations. Risen lighting produces short-wavelength and medium-wavelength infrared heater of standard design
or Golden design, which integrate high-efficiency gold reflectors to direct infrared energy where needed.
 

Wide range of applications
 

    -  Heater               

    -  Plastic forming 

    -  Bottle blowing

    -  Paint drying     

    -  Food catering/processing and etc.   

    -  Pre-heating of PET perform           

    -  Fusing printing ink

    -  Drying process in paper mill         

    -  Plastics thermoforming

    -  Silicon wafer manufacturing process in Semiconductor

    -  And various kind of drying processes

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
advantages and features:

 

Very High Heating Rates. The extremely high source temperature of the tungsten filament leads to high thermal transfer and extremely fast heating.
Fast Response. The low thermal mass of the tungsten filament gives outstanding control of the heat output and process temperature. Full output can be obtained within seconds of applied power. Also, power can be turned off almost immediately if production should stop.
Controllable Output. Output can be controlled precisely to match the temperature requirements of the process.
Directional Heating. Systems are able to selectively heat specific regions of the part.
Clean Heating. Electric heat source is environmentally clean and efficient.
High Heating Efficiencies. Up to 86% of input electrical power is converted to radiant energy (heat).
 

Technical parameters:

Infrared heater specificationVoltagePowerLength
Min120v50w100mm
Max480v10000w3300mm
quartz glass tube cross-section10mm 12mm 15mm 18mm11x23 mm twin tube15x33mm twin tube


353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Nanjing Risen Lighting is indicated to providing the highest quality dual-tube quartz infrared heater on the market. We produce
10mm, 12mm,15mm,18mm or 23mm x 11mm and 33mm x 15mm cross-section quartz tube ,medium wave, fast medium wave
and short wave twin-tube lamps heater. Our heater lamps can be made of high-temperature white oxide reflectors, high-efficiency
23K gold reflectors or pure clear quartz.

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Why choose quartz glass?

The quartz glass is ideal for Infrared heating : this excellent material is completely transparent under infrared radiant, can
withstand a constant operating temperature of over 1000°C, and is chemically resistant.

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Carbon infrared heat lamp
carbon fiber can provide more heating efficiency . ideal for infrared heating

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Tungsten halogen heat lamp with metal terminal

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Gold Reflector for IR lamps 

The Gold reflector provide more directional heating.
In order to transfer and focus the heat more effectively on the material, a special reflector is directly installed on the quartz tube.
According to specific applications and customer needs, Risen usually uses gold, white and ruby reflectors on its IR transmitters.

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Short wave Twin tube IR emitter quartz infrared heater

Risen Lighting use Two types of quartz tubes are used: single tube and double tube. Due to The reverse "H" shape, the double
tube provides the best mechanical resistance and allows the manufacture of launchers up to 3.5 meters in length.

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Medium wave infrared heater for lamination

we can provide 11x23 mm and 15x33mm cross-section and length up to 4 meters .
 

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps
Production process

- Strict quality control
- mature manufacturing procedure
- Be serious for all steps until lamps arrive you 

353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps

Clips, clamps and lampshade for infrared heater 

If the complete heating system is working properly, then Risen infrared heaters can support your entire production process 
well 
. You may need some clips and accessories. We also have high requirements for the quality of the accessories.


The clips can make it easy to install infrared lamps. The clamp made of stainless steel , a Effective hold to the heater,
Long-lasting and stable.


353mm 235V Sk15 Gold Coated Reflector IR Tubular Bulb Quartz Infrared Heaters Halogen Lamps

FAQ
----------------------------------------------------------------------------------
1. Is Risen lighting a factory or trading company?

Risen is a factory, we are professional manufacturer of infrared heater


2. Where is your factory? Can I visit your factory?

We're in city Nanjing, middle of China. It's 1 hour by train from Shanghai, 2 hours by plane from Guangzhou.

You are warmly welcome to our factory, we will be happy to show you our production, QC, warehouse, etc.


3. Can I have samples? Is it free?

Yes, we are happy to offer samples for you to check and test. Depends on sample quantity and product model, we will
confirm with you whether it's free sample or not.


4. What is your term of delivery?

We accept FOB, CIF, EXW etc. Please choose the one which is the most convenient and cost effective for you.


5. What about the lead time for mass production?

It depends on the order quantity and the season you place the order. Generally speaking, the lead time of MOQ is about
7-15 days. We suggest that you start inquiry at least two months before the date you would like to get the products at your country.


6. Do you offer guarantee for the products?

Yes, it must be. We guarantee 2 years for heaters and 5000-8000 hours for infraraed heater. 

 
7. What type of payment do you accept?

T/T.WEST UNION.PAYPAL.CREDIT CARD.


8. Is it OK to print my logo on product?

Yes, it's possible. But please kindly note we have MOQ request for different products. 


9. Can you do the design for us?

Yes. We have a professional team having Good experience in box design and manufacturing. Just tell us your idea and
we will help to carry out your ideas into perfect packing boxes. It does not matter if you do not have someone to complete
files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you
finished files for confirmation.

quartzinfraredheater.en.made-in-china.com
 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours